Comparisons and alternatives
Best industrial Raspberry Pi controllers, 2026
Updated
There is no single best industrial Raspberry Pi controller; the right one depends on the job. For a certified, PLC-style controller with deep documentation, the Revolution Pi Connect 5 is the reference. For the widest temperature range, CompuLab’s IOT-GATE-RPI5 leads at -40 to +80 °C. For the most I/O for the money, Seeed’s reComputer Industrial and KinCony’s boards put dozens of channels in one box.
This roundup is grouped by use case. Every figure links to the vendor page it came from, checked on 2026-11-19. halfnine plans its own CM5 controller but has no product yet, so it is not ranked here.
How we picked
- Built on a Raspberry Pi board or Compute Module, sold as a finished, enclosed unit for DIN rail or panel mounting.
- Current product with a public product page. CM5 models are preferred, because the CM5 stays in production until at least January 2036, two years longer than the CM4 (CM5, CM4).
- We did not test these units. This is a comparison of published specifications. Where a vendor page conflicts with itself, we say so.
Best overall for machine builders: Revolution Pi Connect 5
- Price: from €536 excluding tax, I/O modules extra (as of 2026-11-19) (product page)
- Temperature: -25 to +55 °C (product page); -25 to +60 °C for typical use (docs)
- Certifications: CE, UKCA, UL File No. E494534; developed according to EN 61131-2
- Why: The most complete software in the category: Cockpit for administration, PiCtory for I/O, a shared process image used by Python, Node-RED and CODESYS (software). Up to 10 I/O modules, two CAN FD ports and TPM 2.0 on the Connect 5.
- Trade-offs: No I/O on the base unit, and expansion modules come only from KUNBUS. No first-party remote alarm or fleet service.
Best for wide temperature: CompuLab IOT-GATE-RPI5
- Temperature: -40 to +80 °C on the industrial variant; 0 to +60 °C on the commercial one (product page)
- I/O: 2× isolated RS485 or CAN FD, 4 isolated DIO (24 V, EN 61131-2), optional LTE and GNSS
- Certifications: FCC, CE RED, EN 61000-6-2 and -6-3 (industrial EMC), EN/UL/IEC 62368-1
- Why: The only CM5 unit we found rated below -25 °C. 5-year warranty, Yocto and Raspberry Pi OS images, balenaOS support.
- Trade-offs: A gateway, not a controller with lots of I/O. No public price.
Best I/O per box: Seeed reComputer Industrial R20xx
- I/O: 8 isolated DI, 8 isolated DO, 3× isolated RS485, 1× RS232; CAN FD on R21xx models (wiki)
- Temperature: -20 to +65 °C in the spec table, -20 to +60 °C in the features list (same page)
- Certifications: CE, FCC, TELEC, RoHS, REACH; IP40
- Why: I/O, hardware watchdog, optional TPM 2.0, optional Hailo-8 AI accelerator and 4G/5G, in one fanless box powered from 9–36 V DC or PoE.
- Trade-offs: No UL listing. The wiki gives two different production-lifetime dates (2030 and 2036); confirm with Seeed. Price not on the wiki.
Best for serial-heavy and redundant installs: Sfera Labs Strato Pi Max
- Price: XS with CM5 Wireless, €435 at launch in December 2024 (CNX)
- I/O: expansion boards add up to 16× RS-485, 4× RS-232, 4× CAN, 28 DI and 28 DO (XL has four slots, XS one)
- Why: Dual microSD on the XL, 10–50 V DC input, open drivers on GitHub. Sfera’s CM4S-based Strato Pi CM and CM Duo are UL-listed to UL 61010-1 (announcement), which matters if you can use the older module.
- Trade-offs: We found no published temperature range or certification for Strato Pi Max.
Best for building automation and many digital channels: KinCony Pi5M32
- I/O: 32 isolated DI, 32 MOSFET DO at 2 A, 2× 0–5 V and 2× 4–20 mA inputs, RS485, RS232 (KinCony)
- Temperature: -20 to +70 °C
- Why: The most digital channels on a single CM5 board we found, with Home Assistant and Node-RED named as supported.
- Trade-offs: No certifications on the product page. Aimed at smart home and light industry.
Best low-cost serial gateway: Waveshare IPCBOX-CM5 or Seeed R1100
- Waveshare IPCBOX-CM5: 4× isolated RS485 (A) or 2× RS485 + 2× RS232 (B), isolated CAN, 2 DI, 2 DO, 7–36 V DC (docs). Temperature and certifications are not published.
- Seeed reComputer R1100: CM4-based, 2× RS485, 2× RS232, 2 DI, 2 DO, -30 to +70 °C, CE/FCC/TELEC (wiki).
- Trade-offs: Little I/O, and the R1100 uses the older CM4.
Best “PLC in a box”: Industrial Shields Raspberry PLC
- Price: €463.76 to €693.76 “from” prices across eight models, as of 2026-11-19 (taxonomy)
- I/O: 17 to 62 points built in, depending on model
- Certifications: CE, RoHS
- Why: You wire it like a PLC and program it in Python or Node-RED on Raspberry Pi OS.
- Trade-offs: The taxonomy page does not say which Raspberry Pi board each model uses or give a temperature range. No UL listing named.
Best for an HMI panel: Comfile CPi-J070WR / CPi-G070WR
- Price: $429.00 to $728.00 depending on configuration, as of 2026-11-19 (Comfile)
- Why: A 7-inch touchscreen and a CM5 in one panel-mount unit.
- Trade-offs: The listing page gives no temperature, certification or I/O; check the product pages.
Not a Raspberry Pi, but worth comparing: Arduino Opta
If your job is simple logic plus a cloud dashboard, a microcontroller PLC may be enough. The Opta Lite costs €156 (store), is cULus-listed, rated -20 to +50 °C, and programmable in the IEC 61131-3 languages (datasheet). Arduino Cloud adds dashboards and remote updates. It does not run Linux, so it cannot host Docker, databases or general-purpose software.
What none of them include
Every Linux controller above ships an operating system and drivers. None of the vendor pages we checked describes a first-party service that raises an alarm on a sensor value and notifies someone by SMS, call or push. Raspberry Pi’s own Connect for Organisations adds remote access, A/B image updates, a device inventory and an audit log at $0.50 per device per month, but not alarms (Raspberry Pi). Budget the time to build or buy that layer.
halfnine is designing a CM5 controller with a runtime, local supervisor and cloud alarms. To be decided: halfnine entry with specs, price and availability once confirmed.
Summary table
| Use case | Pick | Price (2026-11-19) | Operating temp |
|---|---|---|---|
| Machine builders, certified PLC-style | RevPi Connect 5 | From €536 excl. tax + I/O | -25 to +55 °C |
| Wide temperature | CompuLab IOT-GATE-RPI5 | Not published | -40 to +80 °C |
| I/O per box | Seeed R20xx | Not published | -20 to +65 °C |
| Serial-heavy, redundant | Strato Pi Max | €435 (XS, Dec 2024) | Not published |
| Many digital channels | KinCony Pi5M32 | Not published | -20 to +70 °C |
| Low-cost serial gateway | Waveshare IPCBOX-CM5 | Not published | Not published |
| PLC in a box | Industrial Shields Raspberry PLC | €463.76–€693.76 | Not published |
| HMI panel | Comfile CPi-J070WR | $429–$728 | Not published |
For the full data with every interface, see the CM5 controller comparison table.
Sources
- Raspberry Pi Compute Module 5 product page, accessed 2026-11-19
- Raspberry Pi Compute Module 4 product page, accessed 2026-11-19
- Revolution Pi Connect product page, accessed 2026-11-19
- RevPi Connect 5 documentation, accessed 2026-11-19
- Revolution Pi software overview, accessed 2026-11-19
- CNX Software, Strato Pi Max with Raspberry Pi CM5 (2024-12-12), accessed 2026-11-19
- Electronica Azi, Sfera Labs announces UL listing of Strato Pi CM and CM Duo, accessed 2026-11-19
- Seeed Studio wiki, reComputer Industrial R20xx, accessed 2026-11-19
- Seeed Studio wiki, reComputer R1100, accessed 2026-11-19
- CompuLab IOT-GATE-RPI5 product page, accessed 2026-11-19
- KinCony Pi5M32 product page, accessed 2026-11-19
- Industrial Shields product taxonomy, accessed 2026-11-19
- Arduino Opta Lite store page, accessed 2026-11-19
- Arduino Opta datasheet, accessed 2026-11-19
- Waveshare IPCBOX-CM5-A documentation, accessed 2026-11-19
- Comfile Technology Linux panel PC listing, accessed 2026-11-19
- Raspberry Pi Connect for Organisations, accessed 2026-11-19