Comparisons and alternatives
Revolution Pi alternatives
Updated
The closest alternatives to a Revolution Pi Connect are other Linux controllers built on a Raspberry Pi Compute Module: Sfera Labs Strato Pi Max, Seeed reComputer Industrial, CompuLab IOT-GATE-RPI5 and Kontron AL Pi-Tron CM5. If you mainly want a small PLC rather than a Linux computer, Arduino Opta and Industrial Shields Raspberry PLC are the usual comparisons. Which one fits depends on why you are looking past RevPi: price, I/O, temperature, certification or software.
What Revolution Pi does well
Start with what you would give up. The RevPi Connect 5 runs a Compute Module 5, has two Gigabit Ethernet ports, up to two CAN FD ports and a TPM 2.0, and takes up to 10 I/O modules on its side bus (product page). KUNBUS says the series was “developed according to” the PLC standard EN 61131-2, and the Connect 5 documentation gives UL File No. E494534 (docs). Its software is the most complete in the group: a Debian-based OS with a real-time patch, the Cockpit web admin, the PiCtory I/O configurator, and a shared process image that Python, Node-RED and CODESYS can all read (software). The documentation is deep.
Why people look for alternatives
- Cost of a working system. The Connect 5 starts at €536 and the Connect 4 at €418, both excluding tax, as of 2026-11-19 (product page). The base unit has no digital or analog I/O. You add modules, each sold separately.
- Closed expansion bus. PiBridge modules come only from KUNBUS.
- Temperature. The product page gives -25 to +55 °C; the documentation gives -25 to +60 °C for typical use (product page, docs). Some alternatives go wider.
- Several tools instead of one. Configuration, I/O mapping and logic live in different tools. Since the May 2025 Bookworm images, Node-RED is no longer preinstalled and is added through Cockpit (release notes).
- No first-party remote alarms or fleet service. The software page describes on-device tools; remote monitoring and updates rely on third-party products (software).
The alternatives at a glance
Prices and specs are from vendor pages as of 2026-11-19 unless dated otherwise. “Not published” means the vendor page we checked did not state it.
| Product | Module | Price | Built-in I/O | Operating temp | Certification named by vendor |
|---|---|---|---|---|---|
| RevPi Connect 5 (reference) | CM5 | From €536 excl. tax | None on base unit; modules extra | -25 to +55 °C | CE, UKCA, UL E494534 |
| Sfera Labs Strato Pi Max XS / XL | CM5 or CM4 | XS CM5: €435 at launch, Dec 2024 | Via expansion boards: up to 16× RS-485, 4× CAN, 28 DI, 28 DO | Not published | Not published |
| Seeed reComputer Industrial R20xx | CM5 | Not published | 3× RS485, 1× RS232, 8 DI, 8 DO | -20 to +65 °C | CE, FCC, TELEC |
| CompuLab IOT-GATE-RPI5 | CM5 | Not published | 2× RS485 or CAN FD, 4 DIO | -40 to +80 °C (industrial variant) | FCC, CE RED, UL/IEC 62368-1 |
| Kontron AL Pi-Tron CM5 | CM5 | Not published | RS232, RS485, CAN FD, 4 DIO | Not published | Not published |
| KinCony Pi5M32 | CM5 | Not published | 32 DI, 32 DO, 4 analog in, RS485 | -20 to +70 °C | Not published |
| Industrial Shields Raspberry PLC | Raspberry Pi (board not stated) | €463.76 to €693.76 “from” | 17 to 62 I/O by model | Not published on that page | CE, RoHS |
| Arduino Opta | Microcontroller, not Linux | Opta Lite €156 | Built-in DI/AI and relays | -20 to +50 °C | cULus, CE, UKCA, FCC |
| halfnine | To be decided: module choice | To be decided: price | To be decided: I/O list | To be decided: tested range | To be decided: certification status |
Sources: RevPi, Strato Pi Max, Seeed, CompuLab, Kontron, KinCony, Industrial Shields, Opta store, Opta datasheet.
If you need more serial ports or redundancy: Sfera Labs Strato Pi Max
Strato Pi Max is a modular DIN-rail controller. The XS has one internal expansion slot and the XL has four. Expansion boards add up to 16 RS-485/RS-422 ports, 4 RS-232, 4 CAN, isolated analog inputs and up to 28 digital inputs and outputs. It accepts 10–50 V DC, and the XL has dual microSD slots (CNX). The XS with a CM5 Wireless module was €435 at launch in December 2024 (same source). Sfera’s older Strato Pi CM and CM Duo, on the CM4S, are UL-listed to UL 61010-1 (announcement). We found no UL statement for Strato Pi Max. Software is Raspberry Pi OS with Sfera’s drivers on GitHub; there is no configuration tool like PiCtory.
If you want I/O included and a wider temperature range: Seeed reComputer Industrial
The R20xx series puts 8 isolated digital inputs, 8 isolated digital outputs, 3 isolated RS485 ports and an RS232 port in one fanless DIN-rail box, with a hardware watchdog, 9–36 V DC or PoE input and optional TPM 2.0 (wiki). The spec table gives -20 to +65 °C, but the same page’s features list says -20 to +60 °C, and it gives two production-lifetime dates (December 2030 and December 2036). Ask Seeed which applies. Certifications are CE, FCC and TELEC; no UL is listed. The CM4-based R1100 is rated -30 to +70 °C (R1100 wiki).
If you need the widest temperature range: CompuLab IOT-GATE-RPI5
The industrial variant is rated -40 to +80 °C, the widest of any CM5 controller we found. It has 2 isolated RS485 or CAN FD ports, 4 isolated digital I/O that CompuLab describes as 24 V compliant with EN 61131-2, optional LTE, and a 5-year warranty (product page). It is a gateway with a few I/O points, not a PLC replacement. Its UL listing is to UL 62368-1, the IT equipment safety standard.
If you want a large industrial brand: Kontron AL Pi-Tron CM5
Kontron’s unit is a fanless DIN-rail box with RS232, RS485, CAN FD and 4 DIO. The OS is not preinstalled, and price, temperature and certifications are not on the product page (Kontron). It suits buyers who already purchase from Kontron.
If you need many digital channels at low cost: KinCony
The Pi5M32 has 32 isolated inputs, 32 MOSFET outputs rated 2 A, analog inputs and RS485, at -20 to +70 °C (KinCony). It is aimed at smart home and light industry and lists no certifications on that page.
If you want a PLC, not a Linux computer
- Industrial Shields Raspberry PLC. I/O is built in, from 17 to 62 points, at €463.76 to €693.76 “from” prices, with CE and RoHS (taxonomy). It runs Raspberry Pi OS with Node-RED, Python and Docker.
- Arduino Opta. A microcontroller PLC co-developed with Finder, from €156 for the Opta Lite (store). It is cULus-listed, rated -20 to +50 °C, and programmable in the IEC 61131-3 languages (datasheet). It is the only option here with a first-party cloud dashboard (Arduino Cloud), but it does not run Linux.
- Siemens SIMATIC IOT2050. Not a Raspberry Pi, but often compared. It runs a Debian-based OS on a TI processor and is rated 0 to +50 °C (datasheet).
How to decide
- List the I/O you need and price the whole system, not the base unit.
- Check the temperature where the cabinet will sit, including summer and enclosure heat.
- If an inspector or customer requires UL, ask each vendor for the file number and the standard it covers.
- Decide who will build the software you need on top of Linux: remote access, alarms, updates.
halfnine plans a CM5 controller with its own runtime, local supervisor and cloud alarms. To be decided: halfnine specs, price and availability, once confirmed. Until then, every product above ships today.
Sources
- Revolution Pi Connect product page, accessed 2026-11-19
- RevPi Connect 5 documentation, accessed 2026-11-19
- Revolution Pi software overview, accessed 2026-11-19
- Revolution Pi Bookworm release notes (2025-05-28), accessed 2026-11-19
- CNX Software, Strato Pi Max with Raspberry Pi CM5 (2024-12-12), accessed 2026-11-19
- Electronica Azi, Sfera Labs announces UL listing of Strato Pi CM and CM Duo, accessed 2026-11-19
- Seeed Studio wiki, reComputer Industrial R20xx, accessed 2026-11-19
- Seeed Studio wiki, reComputer R1100, accessed 2026-11-19
- Industrial Shields product taxonomy, accessed 2026-11-19
- Arduino Opta Lite store page, accessed 2026-11-19
- Arduino Opta datasheet, accessed 2026-11-19
- Siemens SIMATIC IOT2050 datasheet, accessed 2026-11-19
- CompuLab IOT-GATE-RPI5 product page, accessed 2026-11-19
- Kontron AL Pi-Tron CM5 product page, accessed 2026-11-19
- KinCony Pi5M32 product page, accessed 2026-11-19