Selection guides
How to choose an industrial Raspberry Pi controller
Updated
Choose an industrial Raspberry Pi controller by working backwards from the site: the I/O you must wire, the temperature inside the cabinet, the certifications your customer or inspector requires, and who will maintain the software for the next ten years. Base price is the last thing to compare, because I/O modules, licences and the software you build on top often cost more than the unit.
The questions below are in the order that usually rules products out fastest.
1. What I/O and fieldbus do you need?
Count every signal: digital inputs and outputs, analog inputs (0–10 V or 4–20 mA), relays, and serial or fieldbus ports (RS485 for Modbus RTU, CAN, Ethernet for Modbus TCP or MQTT). Then add spare capacity.
Controllers differ widely here:
- Some have no I/O on the base unit. The RevPi Connect 5 has Ethernet, optional RS485 and up to two CAN FD ports, and takes I/O as separate modules, up to 10 (docs).
- Some build it in. Seeed’s reComputer Industrial R20xx has 8 isolated digital inputs, 8 isolated outputs and 3 RS485 ports (wiki). KinCony’s Pi5M32 has 32 inputs and 32 outputs (KinCony).
- Gateways have a handful. CompuLab’s IOT-GATE-RPI5 has 4 digital I/O and 2 RS485-or-CAN ports (CompuLab).
Check isolation too. Isolated inputs and serial ports survive ground differences and noise that destroy non-isolated ones.
2. How hot and cold will it get?
The Compute Module 5 itself is rated -20 to +85 °C (CM5 brief), but a finished controller is rated narrower, because of its power supply, enclosure and other parts. Published ranges for CM5 controllers include:
| Controller | Operating temperature | Source |
|---|---|---|
| RevPi Connect 5 | -25 to +55 °C | product page |
| Seeed R20xx | -20 to +65 °C | wiki |
| KinCony Pi5M32 | -20 to +70 °C | KinCony |
| CompuLab IOT-GATE-RPI5 (industrial) | -40 to +80 °C | CompuLab |
Measure or estimate the inside of the cabinet, not the room. A sealed outdoor enclosure in sun can run well above ambient. If the vendor publishes no range, ask for it in writing.
3. Which certifications does the job require?
Ask your customer, panel builder or inspector before you shortlist. Common requirements:
- CE (and UKCA for Great Britain) to sell in Europe. Most vendors list it.
- UL listing for North American control panels. Few Pi controllers have it. KUNBUS gives UL File No. E494534 for the RevPi Connect 5 (docs). Sfera Labs’ CM4S-based Strato Pi CM and CM Duo are listed to UL 61010-1 (announcement). Ask for the file number and check which standard it covers: CompuLab lists UL 62368-1, a safety standard for IT equipment rather than for industrial control equipment (CompuLab).
- Industrial EMC, such as EN 61000-6-2 immunity, if the controller sits near drives and contactors.
- EN 61131-2 is the hardware standard for programmable controllers. KUNBUS says the RevPi series was “developed according to” it (product page); that is not the same as a third-party certificate, so ask what was tested.
4. How long must it stay in production?
Industrial installations often run ten years or more, and you want to buy the same unit for spares. Raspberry Pi commits to keeping the CM5 in production until at least January 2036 and the CM4 until at least January 2034 (CM5, CM4). The controller around the module needs its own commitment from its vendor. Get it in writing; one Seeed page gives two different dates for the same series (wiki).
5. How will you program it?
All Linux Pi controllers can run Python, Node-RED or your own services. If your team works in ladder logic or structured text, check for a CODESYS runtime or another IEC 61131-3 environment (PLCopen). KUNBUS documents CODESYS, Node-RED and Python against a shared process image (software). Many other vendors list support for these tools but leave integration to you.
6. How will you update and reach it remotely?
Plan for security updates over the product’s life. Options include balenaOS, Mender, your own image pipeline, or Raspberry Pi Connect for Organisations, which offers remote access, A/B image updates, a device inventory and an audit log for $0.50 per device per month as of 2026-11-19 (Raspberry Pi). Check whether the controller has a TPM or secure element if you need device identity; the RevPi Connect 5 and Connect 4 have TPM 2.0 (product page).
7. Who gets told when something goes wrong?
A controller that logs a fault no one reads is no better than none. Decide how alarms reach a person (SMS, call, email, push), who is on call, and how acknowledgements are recorded. None of the Linux controller vendors above document a first-party service for this, so it is usually your own code or a separate product. Include it in the budget.
8. What does the whole system cost?
Add up, per site:
- Base unit (for example, RevPi Connect 5 from €536 excluding tax, as of 2026-11-19 (product page))
- I/O modules or expansion boards
- Power supply and DIN-rail hardware
- Software licences (CODESYS runtime, remote management, cloud)
- Engineering time to build, test and maintain the application, updates and alarms
The cheapest base unit can be the most expensive system if it needs more modules or more custom software.
A short checklist
| Question | Write down |
|---|---|
| I/O | Count by type, plus 20% spare |
| Fieldbus | Modbus RTU/TCP, CAN, MQTT, others |
| Temperature | Minimum and maximum inside the enclosure |
| Certifications | Required list, with who requires each |
| Lifecycle | Years of supply needed |
| Programming | Python, Node-RED, IEC 61131-3 |
| Remote access and updates | Tool and cost per device |
| Alarms | Channels, escalation, audit |
| Budget | Total per site, not per unit |
Where halfnine fits
halfnine plans a CM5 controller with its own runtime, local supervisor and cloud alarms, aimed at questions 6 and 7 above. To be decided: halfnine I/O, temperature, certification and price, once confirmed. Until it exists, use this checklist with the products in the CM5 controller comparison table.
Sources
- Raspberry Pi Compute Module 5 product page, accessed 2026-11-19
- Raspberry Pi Compute Module 5 product brief, accessed 2026-11-19
- Raspberry Pi Compute Module 4 product page, accessed 2026-11-19
- Revolution Pi Connect product page, accessed 2026-11-19
- RevPi Connect 5 documentation, accessed 2026-11-19
- Seeed Studio wiki, reComputer Industrial R20xx, accessed 2026-11-19
- CompuLab IOT-GATE-RPI5 product page, accessed 2026-11-19
- KinCony Pi5M32 product page, accessed 2026-11-19
- Electronica Azi, Sfera Labs announces UL listing of Strato Pi CM and CM Duo, accessed 2026-11-19
- Revolution Pi software overview, accessed 2026-11-19
- Raspberry Pi Connect for Organisations, accessed 2026-11-19
- PLCopen, IEC 61131-3, accessed 2026-11-19